Table of Contents
Advertisement
PT Speed:
Pan/Tilt movement Speed
Pan Inv:
For Normal/Inverted Pan control
Tilt Inv:
Normal/Inverted Tilt control
OP Speed:
Slow/Fast Optics Speed
Black D:
Instant: Immediate blackout when using Pan/Tilt.
Delay: 3 seconds delay before blackout when using Pan/Tilt
Dimmer:
DIM1, DIM2, DIM3, DIM4, OFF
When DIMMER is set to OFF, then RGBW and MASTER DIMMER are linear.
Dim 1, 2, 3, 4 are speed modes of the non linear dimmer, Dim1 is fastest, Dim4 is slowest.
The factory default setting is Dim4.
Dim Inv:
Normal/Inverted control of the Dimming function
DMX Error:
Save: Maintain the last command in case of a DMX error.
Black: Indigo blackout in case of a DMX error
DMX reset:
DMX: You are able to remotely reset the Indigo with a DMX controller.
Display: You are only able to reset the Indigo via the display on the device.
Display:
Long/Short/Always The time the display backlight lights up when using the menu buttons.
Key lock:
No/Yes; Lock the display when it is not in use or at start-up.
Homepage: DMX: to show the DMX Address
Name: to show a user created content in the LCD display, when it is not in use
3.2 Range
1) Press Menu, until the display shows: Range
2) Press Enter and use the Up/Down buttons to scroll through: P.Start, P.End, T.Start, T.End.
3) Press enter to open this menu. Use the Up / Down buttons to set the desired value.
4) Once you have set the desired mode, press the enter button to store your setting.
3.3 Default
1) Press Menu, until the display shows: Default
2) Press Enter and use the Up/Down buttons to choose: Yes or No.
3) If you use Yes, the device will return to the factory default setting.
3.4 Send
1) Press Menu, until the display shows: Send
2) Press Enter and use the Up/Down buttons to choose: Yes or No.
3) If you use Yes, the device will send all settings to in-line fixtures.
16
Advertisement
Table of Contents
