Table of Contents
Advertisement
Spectral M400 IP67
6. Edit Mode
With this menu, you can create your own custom shows.
01) Press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose the desired custom program: PR.01 – PR.10.
04) Each custom program has 30 scenes, which can be edited.
05) Once you have chosen the desired scene, press the ENTER button to enter the settings.
06) Press the ENTER button to toggle between RED, GREEN, BLUE, STROBE, STEP TIME and FADE options.
07) When the display shows RED, GREEN and BLUE, press the UP/DOWN buttons to increase/decrease
the LED intensity. The adjustment range is between 0-255, from OFF to FULL ON.
08) When the display shows STROBE, press the UP/DOWN buttons to set the strobe frequency. The
adjustment range is between 0-20, from OFF to high frequency.
09) When the display shows TIME, press the UP/DOWN buttons to set the duration of a scene. The
adjustment range is between 0-255, from 0 to 255 seconds.
10) When the display shows FADE, press the UP/DOWN buttons to set the fade time between particular
scenes. The adjustment range is between 0-255, from 0 to 255 seconds.
6.1. How to make your own custom program
01) First, start with PR.01 and add the desired settings in scene 1 (SC.01), then scene 2 (SC.02) , etc.
02) In this way you can add a maximum of 30 scenes.
03) After that, you can start with PR.02 and create a maximum of 30 scenes again.
04) You can repeat these steps, until you've reached PR.10, step 30.
05) It is possible to create 300 separate scenes.
Ordercode: 43534
.
17
Advertisement
Table of Contents
