SHOWTEC Indigo 5500 Manual page 20

Built-in Programs Mode
With this menu you can select 5 different Programs when using the Indigo.
1) Press Menu, until the display shows: Runmode
2) Press Enter and use the Up/Down buttons to go to the Run menu.
3) Press enter to open this menu. Scroll through the menu until the display shows Auto1, Auto2, Sound1,
Sound2 or Custom. You have 5 options to control the device as a stand-alone device.
4) Once you have chosen your desired mode, press the enter button to store your setting. The device will
start the built-in program.
Built-in Programs (Auto1 + Auto2)
The device will play its built-in stand-alone programs.
Sound-controlled (Sound1 + Sound2)
The device will play its built-in stand-alone sound-controlled programs. The device is now sound-
controlled and will react to the music.
Custom Mode
For a custom program to run, you have to enter some values first.
For more information, please see 4.2 Edit menu.
Run Test
With this menu you are able to test the device.
1) Press Menu, until the display shows: Runmode
2) Press Enter and use the Up/Down buttons to go to the Run menu.
3) Press enter to open this menu. Scroll through the menu until the display shows TEST.
4) When you press ENTER, the display will blink once and the device will start an internal test.
Slave Mode
With this menu you are able to set the device as a slave device.
1) Press Menu, until the display shows: Runmode
2) Press Enter and use the Up/Down buttons to go to the Run menu.
3) Press enter to open this menu. Scroll through the menu until the display shows Slave.
4) When you press ENTER, the display will blink once and the device will be in slave mode.
18