Table of Contents
Advertisement
Spectral PC 400Z IP65
6. Edit Mode
With this menu, you can create your own custom shows.
01) While in main menu, press the UP/DOWN buttons to choose EDIT.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose the desired custom program (PROGRAM1 – PROGRAM 10).
04) Each custom program has 30 scenes, which can be edited. Press the UP/DOWN buttons to select
the desired scene.
05) Press the ENTER button to enter the scene settings.
06) Press the UP/DOWN buttons to toggle through RED, GREEN, BLUE, WHITE, ZOOM, STROBE, TIME and
FADE options.
07) If you have chosen RED, GREEN, BLUE or WHITE, press the ENTER button to open the menu.
08) Press the UP/DOWN buttons to increase/decrease the LED intensity. The adjustment range is
between 0-255, from OFF to FULL ON.
09) If you have chosen ZOOM, press the ENTER button to open the menu.
10) Press the UP/DOWN buttons to set the zoom effect. The adjustment range is between 0-255, from
small to big.
11) If you have chosen STROBE, press the ENTER button to open the menu.
12) Press the UP/DOWN buttons to set the strobe frequency. The adjustment range is between 0-25, from
OFF to high frequency.
13) If you have chosen TIME, press the ENTER button to open the menu.
14) Press the UP/DOWN buttons to set the duration of a scene. The adjustment range is between 0-255,
from 0 to 255 seconds.
15) If you have chosen FADE, press the ENTER button to open the menu.
16) Press the UP/DOWN buttons to set the fade time between particular scenes. The adjustment range is
between 0-255, from 0 to 255 seconds.
6.1. How to make your own custom program
01) First, start with PR.1 and add the desired settings in SCENE-01, then SCENE-02, etc.
02) In this way you can add a maximum of 30 scenes.
03) After that, you can start with PR.2 and create a maximum of 30 scenes again.
04) You can repeat these steps, until you have reached PR.10, SCENE-30.
05) It is possible to create 300 separate scenes.
Ordercode: 43554
17
Advertisement
Table of Contents
