Table of Contents
Advertisement
6. Service
6.1 Access Mode
1) Press Menu, until the display shows: Service
2) Press Enter and use the Up/Down buttons until the display shows: Access menu.
3) Press Enter to open this menu. Use the Up / Down buttons to select Settlock or Servlock.
Settlock: access the settings Menu (Yes or No)
Servlock access the service menu (Yes or No)
4) Press Enter to open one of these menus. Use the Up / Down buttons to select Yes or No.
5) Once you have set Yes, press the enter button to lock the device.
6) It will now take 30 seconds before the device locks itself. When you turn the device off and then on,
It‟s also locked.
NOTE: In the event that the device is locked, please use the factory password below.
Factory Password: UP > DOWN > UP > DOWN
Then press ENTER to unlock the device.
6.2 Info version
1) Press Menu, until the display shows: Service
2) Press Enter and use the Up/Down buttons until the display shows: Info menu.
3) Press Enter to open this menu and select Version.
4) Press enter to see your Indigo version number.
6.3 Display/Send
Display
1) Press Menu, until the display shows: Service
2) Press Enter and use the Up/Down buttons until the display shows: Content menu.
3) Press Enter to open the Display menu and press Enter.
4) You can now edit the first line of display content.
Send
1) Press Menu, until the display shows: Service
2) Press Enter and use the Up/Down buttons until the display shows: Content menu.
3) Press Enter to open the Send menu and press Enter.
4) You can now transfer the display content to all fixtures currently connected via the DMX data cable.
21
Advertisement
Table of Contents
