Set refresh: Click "Refresh" to set refresh and display the version information of one
receiving card.
Refresh: Refresh and display the version information of hardware in order to make sure the
hardware program is updated.
10 Troubleshooting and Precautions
Problem
Blank screen of
LED display
Monitoring port
output is abnormal
www.novastar.tech
Solution
Check whether the power is correctly connected and the switch is
on.
Use test pattern to check whether the LED is correctly connected
and is working properly.
Check whether Pro HD has signal input and the output is set as
black out.
Check whether the display configuration mode and parameters are
correct.
Check whether the input channel has image input and it is
displayed normally.
Check whether PIP is enabled and channel 2 has signal input and
the image is displayed normally.
Check whether monitor output is connected correctly and the
connection is not loose.
If connecting Pro to display, please confirm whether the display
supports the output resolution of Pro.
Try to cut the power and restart the device. Then reset Pro and do
NovaPro HD User's Manual
-35-