Table of Contents
Advertisement
setting, turn the knob and the results can be viewed on the LED display in real time.
Press the knob to save your setting if you are satisfied with it and then press return
button to exit from current operation.
After Port Settings are completed, select "Apply" and press the knob to apply current
settings. If you want to quit the settings, select "Return".
6.8.3 Montage
For oversized LED display, two or more NovaPro HD units are needed for montage. In this
case, the loading area of each NovaPro HD unit needs to be set respectively.
Enable Montage first and set total width and height of the LED display. Then set the size and
starting position of loading area of the NovaPro HD unit.
Total sizes of loading area of all NovaPro HD units are the total sizes of LED display.
Montage Example: the total number of pixels of the LED display is 4000×1000, which has
exceeded the load of a single Pro HD unit. Montage can be applied and two Pro HD units
can be used for montage. See detailed parameter settings and the connections in the chart
www.novastar.tech
NovaPro HD User's Manual
-20-
Advertisement
Table of Contents
