Table of Contents
Advertisement
Initial installation
Turning the set on/off
Switching the TV set to standby mode
Press the power switch on the bottom of the set .
The display in the control panel on the front lights up first orange and
then red. The set is now in standby mode.
M
-
+
R
Control unit
Switching the TV on/off on the control unit
To switch the TV set into Operating mode or switch it off into Standby
mode, press the middle of the On/Off button for about 2 seconds.
Meaning of the display colour of the LEDs in the On/Off
button:
Display
Red:
Standby mode
Green: TV set is switched on
Orange: Radio mode, the device receives EPG data, timer
recording is active or archive recording via USB
is active
(1
USB recording is only possible for devices without DR+ (integrated hard disc recorder).
Mains switch
.
(1
Switching the set on with the remote control
Press the on/off button
or
numeric buttons
or
TV button
or
OK button – station list is called
or
MEDIA button – MediaPortal is called.
Switching the set off with the remote control
Press the on/off button.
➠ Before switching off the set with the mains switch, we
recommend you to switch it to standby mode.
Switch on in Radio mode
Press R on the TV control unit.
or:
Press the AUDIO button on the remote control
(radio mode, see page 58).
21 -
Advertisement
Table of Contents
