Table of Contents
Advertisement
External devices
Programming the timer with the timer overview
All programmed recordings, marked programmes and copy orders
listed in the timer overview. You can also programme new recordings,
mark other programmes and copy
DR archive to an external recorder with the timer overview.
Call DR archive
(1
Red button: Call Timer list.
Red button:
Green button:
Yellow button:
Blue button:
Explanation of the symbols in the timer list:
Record
Repeated recording (daily, weekly or Mon-Fri)
Serial recording
Decoding order (later decoding of an encrypted recorded
programme
(1
)
Marked programme (see page 54)
only for devices with an integrated hard disc (DR + ) or a connected external hard disc
(1
(USB recording), see page 95 onwards..
pre-recorded programmes from the
(1
.
New entry (see right hand column).
Change recording.
Delete recording.
Delete memo.
(1
New entry: Programme timer recording manually
are
(1
➠ Timer list is opened.
Red button: Call New timer entry.
OK call.
OK Call Station selection.
OK Call Timer data.
Entry of the timer data see page 128.
After confirming the timer data the new recording is
transferred to the timer overview.
New entry: Memorize programme using the timer overview
➠ Timer list is opened.
Red button: Call New timer entry.
ording
OK EPG is opened.
Note desired programme as described in Switching and
memorizing with the programme list (page 54).
New entry: Copying DR archive entries
➠ Timer list is opened.
➠ An external recorder is registered.
Red button: Call New timer entry.
Memo
OK The DR archive is opened.
See the chapter Copying recordings (pages 104 and 105)
for further steps.
NEW TIMER ENTRY
Memo
Copy
Recording
OK
Select Recording,
RECORDING WIZARD
Via EPG
Via teletext
Manual
OK
Select Manual.
For programming a timer recording Via EPG or Via
Teletext see page 128.
Select station.
NEW TIMER ENTRY
Memo
Copy
OK
Select Memo.
(1
NEW TIMER ENTRY
Copy
OK
Select Copy.
Reco
Recording Vormer
129 -
Advertisement
Table of Contents
