Loewe Connect 32 3D Operating Instructions Manual page 30

Hide thumbs Also See for Connect 32 3D:
Table of Contents

Advertisement

Initial installation
Setting options for all types of reception:
Favoured
INITIAL INSTALLATION
signal source
Favoured signal source
DVB-T
DVB-C
ASTRA1 19,2°E
Antenna/cable (analogue)
Proceed
OK
Select favoured signal source.
Select the signal source from a list, the station of
which is to be at the top of your station list (starting
with station slot 1).
The listed signal sources depend on the selected
antennas and, if the set is equipped with a satellite
tuner, the type of satellite system used and the
received satellites.
OK Proceed.
Logical
INITIAL INSTALLATION
Channel
Logical Channel Number
Accept Logical Channel Number
Number
Proceed
OK
Accept Logical Channel Number no / yes.
In some countries, digital channels (DVB-T, DVB-C,
DVB-S) are transmitted with a prescribed program
number per channel; these are known as "Logical
Channel Numbers" – "LCN".
If you select yes here, these prescribed channel slots
will be used and the channels of the preferred signal
source will be sorted as per LCN. Depending on the
LCN, spaces or double channel allocations can occur
in the numbering of the channel list (see page 31).
OK Proceed.
Overview of
FIRST INSTALLATION WIZARD
settings for
Your TV set will perform the automatic search with the following settings:
station search
Location of your TV set
Signal source(s)
Installation satellite
Favoured signal source
Start automatic search
OK
You will see a list of the selected settings. You can go
back in steps with the
to the settings.
- 30
OK
Back
no
yes
OK
Back
United Kingdom
Antenna/cable (analogue)
DVB-T
DVB-C
DVB-S
Single satellite (ASTRA1 19,2°E)
ASTRA1 19,2°E
Back
button to make any changes
OK Start automatic search.
The set now searches for TV and radio stations.
The stations found in the automatic search are divided
into the appropriate station blocks depending on the
previously selected antenna cables (signal sources).
Subsequently the stations can only be re-sorted within
these blocks.
➠ At the beginning of the station list you will find the
block with the stations of the preferred signal source.
Any mixed sorting of stations from different signal
sources is only possible with the favourites list.
Select
INITIAL INSTALLATION
bouquet
Select bouquet
(only DVB-S;
TNTSAT C1 (0xc00c)
TNTSAT C2 (0xc00d)
if available)
TNTSAT C3 (0xc00e)
TNTSAT C4 (0xc00f)
Select bouquet.
If you have selected satellite ASTRA as the source of
DVB-S and further bouquets are available, select the
Bouquet that is valid for you.
OK Proceed.
Select region
INITIAL INSTALLATION
(if available)
Select region
none
Elbonia
Ruritania
Select the region.
Depending on the set's location, which signal
sources are available, the network that is selected
and the channel, it may be necessary to select the
region (possibly main region/sub region) that corre-
sponds to your TV's location.
OK Proceed.
OK
OK
continued on next page

Advertisement

Table of Contents
loading

This manual is also suitable for:

Connect 40 3dConnect

Table of Contents