Loewe Connect 32 3D Operating Instructions Manual page 140

Troubleshooting
Problem
No sound via the external digital audio
amplifier.
A programmed recording was not made.
The picture format cannot be adjusted.
When the Picture format button is pressed,
the 3D mode selection appears instead of
the Picture format selection.
The free capacity of the external hard disc is
essentially indicated smaller than expected in
the OSD.
- 140
Possible cause
a) The external digital audio amplifier does not
support the selected sound format (Dolby
Digital, dts, MPEG).
b) TV set and external digital audio amplifier are
not connected with each other.
Recording of analogue stations with VPS data:
The programme to be recorded was not (no longer)
in the programmes offered by the station via VPS.
Recording of DVB stations with automatic time
control:
The provider deleted the programme from the
EPG data, for example due to a programme
change.
A HbbTV application is loaded but is not active
(not displayed).
The TV set is displaying picture material in 3D.
The hard disc has been formatted on FAT32 on a
PC with Microsoft Windows (see also page 111).
Remedy
a) Set PCM stereo on the DVD player in the
sound selection. For DVB stations on the TV
set switch to stereo in the Status display
(INFO) – Language/sound (green button).
b) Connect AUDIO DIGITAL OUT from the TV set
to a digital input of the external digital audio
amplifier and select the appropriate input to
this.
The stations are exclusively responsible for the
transmission of VPS data (for analogue stations)
or for the use of the automatic time control (for
DVB or MHEG-5 stations). The availability of the
appropriate data cannot be guaranteed.
End the HbbTV application with the END
button (see page 84).
Whilst 3D material is being displayed, the picture
format cannot be changed (see page 41).
Format external hard disc on TV set again via
TV menu Settings Miscellaneous
external hard disk.
Format