Loewe Individual 40 Selection Operating Instructions Manual
Hide thumbs
Also See for Individual 40 Selection:
- Service manual (71 pages) ,
- Manual (164 pages) ,
- User manual (152 pages)
Related Manuals for Loewe Individual 40 Selection
Summary of Contents for Loewe Individual 40 Selection
-
Page 1: Operating Instructions
Operating Instructions Individual 40 Selection Individual 32 Selection Individual 32 Individual 26 Selection Individual 26... -
Page 2: Table Of Contents
Timer recording with video or DVD recorder Setting the sound Assignment of digital audio inputs and outputs Picture settings Connecting Loewe DVD Preceiver Auro 2216 PS and Direct control on TV set Individual Sound loudspeaker system Operating modes – TV Connecting other audio amplifiers or active speakers... -
Page 3: Remote Control - Tv Functions
Remote control - TV functions Sound off/on Switch on/off - on stand by LED indicator for current operating mode Switch over to the RADIO mode Switch over to the TV mode Switch over to operate Recorder Switch over to operate DVD-Player Call timer list Sound menu on/off Set picture format... -
Page 4: Control Unit
Control unit Call the menu, Display: in the menu: up standby = operation = operation without screen display = (radio mode, EPG data capture or timer recording) The mains switch is located in the middle of the rear side Switch TV set on/off of the set. -
Page 5: Connections To Rear Panel
Connections to rear panel Device variants with lateral connection sockets and CI slot Common Interface (CI-Slot) Headphone connection S-VHS connection (AVS) (i.e. for camcorders) Video input (AVS) Audio input right Audio input left Individual 32: Cover cannot be opened. AUDI O I N AUDIO OUT 89374.003 ANT -S AT... - Page 6 Connections to rear panel Device variants with lateral CI slot Common Interface (CI-Slot) Individual 32: Cover cannot be opened. Center Audio input (analogue) Audio input left/right (analogue) Audio output left/right (analogue) Antenna/cable PIP tuner Headphone connection or satellite antenna S-VHS connection (AVS) (Sat tuner 1) Rotating stand control Socket for...
-
Page 7: Welcome
Mains Cable As a motorized rotating stand-alone unit • Assist remote control with 2 batteries • Screen Floor Stand MU for Individual 26 / 32 / 40, Loewe order no. 66494Q00. • Table stand mounted • Marketing and service card As an individual mounting solution •... -
Page 8: Note On The Lcd Screen
Welcome Note on the LCD screen Remove the protective foil (only Individual 40) The TV set with an LCD screen you have purchased meets the highest quality requirements and has been tested for pixel errors. Despite the utmost caution Pull the two protective foils slowly and carefully off the front of the unit (see fig.). in production of the displays, it cannot be totally ruled out that some of the pixels might be defective for technological reasons. -
Page 9: For Your Safety
Only use original accessories if possible, e.g. Loewe wall holders and stands. against moisture (rain, drips, Never let children handle the TV unattended. -
Page 10: First Installation
First installation Remote control Connection Batteries Power mains To insert or change the batteries, press on the arrow. Slide the battery compart- Remove the cover for the connections. ment cover downwards and remove it. Insert LR 03 alkaline-manganese batter- Connect the TV set to a 220-240V/50- 60 hertz power outlet. Plug the small ies (AAA) and ensure that the + and - ends are positioned correctly. -
Page 11: Handling The Fabric Hose (Optional)
CA module outwards. easier for you to push through cables with plugs. You can obtain the fabric hose as an accessory from your Loewe dealer or Loewe The CA-module and the Smart Card are not included Customer Service. in the scope of delivery of this set; you can usually obtain them at your specialist dealer. -
Page 12: Automatic Programming
First installation Automatic programming If you only receive one satellite ... 8. In the following menu, specify whether the station search should take place in the high and low band (“Yes“) or only in the low band (“No“). Automatic programming of the TV set is started the first time you switch it on. Note: For most satellites, a station search is required in both bands. -
Page 13: Directing Dvb-T Antenna
First installation Daily operation Directing DVB-T antenna Switching on/off Note: not with DVB-T stations in GB. Your TV is equipped with an eco-standby power supply unit. On standby, the If you use a room antenna to receive one or more DVB-T stations that have power consumption drops to low power. -
Page 14: Changing Stations
Daily operation Changing stations ... via the station list Use OK to call the station list..with the P+/P- buttons on the remote control Station list Numerical COMP. IN 6 3SAT HDMI/DVI 7 S–RTL 8 N–TV Stations up/down 9 DSF 10 TM3 11 PRO7 0 VIDEO... -
Page 15: Basics About The Menu Operation
Daily operation Basics about the menu operation TV menu INFO Sound Bass Menus are called via the MENU button or via the button for special menus and can be hidden by using these buttons or by using the END button. The menu is Set the bass tones by using displayed in the bottom section of the screen. -
Page 16: For The Info System
Daily operation For the info system ... to select the line below, for example “Search wizard“. Search wizard For each menu point, an info text is displayed at the top of the picture to help Use this menu to search for stations automatically once certain settings you with the setting. -
Page 17: For The Index
Daily operation For the index ... For example, you want to have the TV set switch off automatically: Select the index item “Switch off“ – “Automatic“. Using the index, you can access many operational functions directly. You can You can set your TV set to switch off to stand-by mode once or every also find a great deal of information on technical terms about television. -
Page 18: Setting The Sound
Daily operation Setting the sound Picture settings Call up TV menu. Volume and other frequently used sound settings INFO TV menu Connections Picture Sound Recording Settings Setting the volume Picture adjustment Select „Image“ with and selection with Volume to mark image functions to be set. by using or OK, you can call other sound settings ... -
Page 19: Operating Modes - Tv
Operating modes – TV Sleep timer) that can be selected in the “TV menu – Settings – Miscellaneous – On-screen displays“. For the status display, the DVB station providers may offer additional selection In initial installation and daily operation, the TV set is in TV mode. This is also options for each station. -
Page 20: Call Additional Functions
Operating modes – TV Call additional functions TV menu Select additional functions such as Image+ , Teletext subti- Call up the TV menu tles, Personal teletext pages, Headphone volume, INFO TV menu Scan stations and to move the picture up and down. Picture Recording Connections... -
Page 21: Dvb Subtitles
Here you can search for and store new stations automatically or manually. With The TV set can be rotated on a Loewe rotating stand. You can find out more on “Change stations“, you can rearrange and delete the stations and change sta- page 39. -
Page 22: Removing The Ca Module
Operating modes – TV Removing the CA module Searching for new software 1. Switch the TV set off with the mains switch. If you want to carry out a manual search for new software, proceed as follows: 2. Remove the cover from the back of the set Call the TV menu using the MENU button. -
Page 23: Image+ Menu
Image+ demo mode In order to show the way Image+ works, a “Demo mode“ is integrated. Image+ is a picture improvement specially developed by Loewe, which delivers In “Demo mode“, the current picture is divided into two parts. The left half of a sharper, lifelike and colour-fast picture richer in detail and contrast. -
Page 24: Operating Modes - Pip
Operating modes – PIP Picture in picture (PIP) Select the station of the TV picture (main picture) The bar/frame has to be white. If not, press the green Note: The coloured keys do not work as described below with DVB-T stations in coloured key. -
Page 25: Functions In The Pip Menu
Operating modes – PIP Functions in the PIP menu Position of the PIP picture In the PIP menu, you can set the PIP type (small picture or split screen) and the Move the PIP picture with the arrow keys to a corner of the TV position of the small picture. -
Page 26: Operating Modes - Epg
Operating modes – EPG EPG - Programme guide When receiving digital terrestrial and digital satellite stations, you may find that two identical EPG data are displayed in the “EPG (DVB)“ menu for one station. If you call the EPG menu in the EPG mode by using the MENU button, then EPG is an electronic programme guide. -
Page 27: Epg Menu
Operating modes – EPG In front of the programme’s title, the system places an . This station is If you want certain stations to be omitted from the programme guide, you can select and deactivate these via Station selection. Call the station selection by switched later to this programme when the set is switched on. -
Page 28: Operating Modes - Teletext
Operating modes – Teletext Analogue Teletext In Multiple pages scroll using . You can see which multiples pages can be called in the bottom menu line. Teletext transmits information such as news, weather, sports, programme Zeitplan Fußball previews and subtitles. 1 2 3 4 5 6 7 8 9 10 11 12 Teletext on/off Call contents page 100... -
Page 29: Programme Timer Recordings
Operating modes – Teletext Programme timer recordings Digital teletext operation (only for MHEG-5 device versions) A video and/or DVD recorder must be connected and logged in in the connec- In the GB, the teletext for DVB-T stations is transmitted as per the MHEG-5 tion wizard. -
Page 30: Operating Modes - Radio
Operating modes – Radio Radio Radio menu Call radio menu You can only receive radio stations via DVB. If you do not have any DVB radio reception, you can play a sound signal from an external device using the TV set INFO Radio menu via the sound/AV inputs. -
Page 31: Operating Additional Equipment
Operating additional equipment Login and connect equipment Search for and store the station of the video recorder (if no Euro-AV cable is available) You have logged in and connected all connected equipment in the initial instal- Switch on the test station on the VCR or insert a recorded tape and start play- lation. -
Page 32: Video Playback
(e.g. in a rack). You can control the recorder with the TV set. If you have a Loewe recorder with both systems, you can use all the advantages. Now you will see the playback from the connected AV device. -
Page 33: Assignment Of Digital Audio Inputs And Outputs
Audio output “AUDIO DIGITAL OUT“ outputs The digital audio signal is applied at the “AUDIO DIGITAL OUT” socket of the TV. For example, you can connect an external digital audio amplifier or the Loewe Auro system here. Audio input “AUDIO DIGITAL IN”... -
Page 34: Connecting Loewe Dvd Preceiver Auro 2216 Ps And Individual Sound Loudspeaker System
“Sound via“ and then “TV“. If you want to listen to the sound via the subwoofer. Use the cubic plug cable enclosed with the DVD Preceiver. Plug the Loewe Auro system, select “AURO“ under “Sound via“. the white plug (without kink protection) into the cubic socket on the subwoofer. -
Page 35: Connecting Other Audio Amplifiers Or Active Speakers
Operating additional equipment Connecting other audio amplifiers or active Select “Analogue“ for “Sound transmission“ for analogue audio amplifiers. The sound for the analogue amplifier is transmitted via the AUDIO OUT L/R con- speakers nections of the TV to the audio amplifier. Connect the amplifier with two cinch cables. -
Page 36: Hdmi (Dvi) Connection
TV screen as an output device. cable, e.g. from Loewe DVD Recorder Centros 2102/2172 HD. Connect the PC/STB to the VGA/XGA socket on the TV using a The digital picture and sound data are transmitted without data VGA cable. -
Page 37: Component Video Connection
Operating additional equipment Sound from PC or Set Top Box Component video connection Feed the analogue audio signal from the PC or the STB to the sockets AUDIO IN If you have a DVD player/recorder with Component OUT connec- L/R on the TV via a cinch cable. The sound is reproduced via the TV speakers. tions, you can connect it to the SD/HD-COMPONENT IN sockets If you have connected a digital external audio amplifier, you can select the of the TV instead of to the Euro-AV sockets. -
Page 38: Operate Loewe Dvd Player And Recorder
Every time you press the button, the mode indicator (TV – REC – DVD – RADIO) Loewe Xemix 6222 PS currently selected lights up. Functions for the Loewe DVD player (Auro 2216 PS, 8116 DT) Functions for the Loewe DVD recorders (Centros 12x2, 21x2, ViewVision DR+) TV Sound off/on... -
Page 39: Rotating The Tv Set
Operating additional equipment Rotating the TV set Rotate TV Basic adjustment Individual / Individual Selection sets have a connection for a rotating stand con- End of basic adjustment trol. If the TV set is mounted on a motor unit, you can use the remote control to Turn your TV with as far to the left as the location of the set adjust it to your seating location accordingly. -
Page 40: What To Do, If
Wait until the timer recording has ended or delete the (deactivated). timer. The control of the Loewe video recorder and the a) The Digital Link function is not activated or not a) Activate Digital Link in the recorder (see operating timer do not work or do not work properly. - Page 41 What to do, if ... Problem Possible cause Remedy Digital Link Plus does not function. a) Euro-AV cable is not fully wired (pin 10 not a) Replace the Euro-AV cable. wired). b) Some recorders can only adopt stations during b) Restore the recorder to the as-delivered state (see the initial installation of the TV set.
-
Page 42: Technical Data
Technical data General data Type Individual 26 Individual 26 Individual 32 Individual 32 Individual 40 Selection Selection Selection Item no. 65403xxx 65412xxx 65417xxx 65414xxx / 66434xxx 66428xxx • • • • • Versions DVB-T CI (MHEG-5) • • • • •... -
Page 43: Electrical Data
Set-specific equipment and retrofitting options for PIP and satellite tuners, see pages 44 and 45. Printed in Germany TB/09/03/11.0 Dolby and the double ´D´ symbol are Subject to modifications! trademarks of Dolby Laboratories © by Loewe Opta 2009 43 -... -
Page 44: Accessories
Loewe order no. 89754B00 (VESA I 40; Individual 40 Selection) and cable reception. Note: Please only use the original LOEWE VESA adapter for your TV set and use You can retrofit either this PIP tuner or a digital satellite tuner. - Page 45 Individual 40 Selection DVB-T/C CI 66428xxx – ○ ○ Individual 40 Selection DVB-T CI 66428xxx (MHEG-5) – – – Individual 40 Selection DR+ DVB-T/C CI 66428xxx ● – ○ Individual 40 Selection DR+ DVB-T CI 66428xxx (MHEG-5) ● – –...
-
Page 46: Service
Tel +48 - 58 - 6 61 28 00 Fax +966 (2) 660 7864 Fax +44 - 1294 315 001 Fax +48 - 58 - 6 61 44 70 Email hkurkjian@aol.com Email enquiries@loewe-uk.com Email market@dsv.com.pl © by Loewe Opta 091208...
Need help?
Do you have a question about the Individual 40 Selection and is the answer not in the manual?
Questions and answers