Table of Contents
Advertisement
Digital Recorder
Setting the pre-record and post-record time
You can set a pre-record and post-record time for timer recordings made
without VPS (analogue) or auto time control (DVB) (see also page 112).
This minimizes the risk that a part of the broadcast is not recorded due
to the broadcast starting earlier and/or finishing later.
MENU: Call TV menu.
Choose Recording,
switch to the menu line below.
PRE-RECORD TIME
If you record a programme without VPS, you can enter a time span here
specifying how long before the scheduled time your programmed recording
should start so that programmes which begin too early are recorded
in full.
TV MENU
Recording
list
Pre-record time
00 min (0 - 15)
Set pre-record or post-record time,
switch to the menu line below.
Enter the time using the numeric buttons (always 2-digit:
01 to 15 mins for pre-record time; 01 to 60 mins for
post-record time). Factory setting: pre-record: 00 min,
post-record: 05 min.
- 92
Post-record time
Recording wizard
DR+ Streaming settings
DR+ STREAMING SETTINGS
Share the DR archive with other TVs
Using the DR archives of other TVs
DR device name
DR device group name
IP port number
DR standby
Share the DR
Enter here whether recorded broadcasts within your TV
archive with
set's DR archive are to be accessible for viewing from
other TVs
(1
other TV sets (server function).
Using the DR
Setting yes enables you, via the archive, to also view
archives of
recordings from other TV sets that have accessible films
other TVs
within the home network (client function).
DR device
in DR + Streaming.
name
(1
DR device
Give a name for your TV set group.
group name
Using different group names enables you to group your
TV sets as required. Only TV sets under the same group
name can exchange data.
IP port
IP port numbers are preset ex-factory. Under normal
number
circumstances they do not require amending.
DR standby
(1
Set here how long your TV set is to continue to give access
tal (refer also to the operating instructions of the TV set).
This stand-by period is also activated as soon as data
exchange to another TV set has been completed.
only for TV sets with DR + .
(1
yes
yes
LOEWE TV
Home
17123
2 hrs
DR+ Streaming within the MediaPor-
no
Advertisement
Table of Contents
