Tv Viewing With Time Shift - Loewe Connect 32 3D Operating Instructions Manual

Hide thumbs Also See for Connect 32 3D:
Table of Contents

Advertisement

Digital Recorder

TV viewing with time shift

The Digital Recorder continuous operation (only for TV sets with DR + ) is
switched on as the factory default setting (see page 91). In this case,
the TV broadcast that you wish to view is automatically recorded in the
background. The maximum time shift is up to 3 hours.
➠ Please also read the instructions on watching time-shifted television
on page 89.
➠ Programmes with copy protection (e.g. Macrovision) cannot be
watched with a time shift for legal reasons.
Interrupt
Press PAUSE button.
09:45-10:00
09:45
DR archive
The TV image becomes a freeze frame and the DR status
display appears.
At the top you will see the number and name of the
station if EPG or teletext data are available, in addition
to the start and end of the current programme and the
title of the programme.
On the left hand side of the bar you can see the start time
for time shift recording. On the right hand side of the bar
you can see the time at which the time shift recorder will
be full (automatically extends by 30 minutes, up to a max.
3 hours). The bar shows the amount of available record-
ing capacity already used. The time displayed inside the
bar is the time at which the Pause button was pressed.
Continue (time shift viewing)
Press PLAY button.
09:45-10:00
09:45
You can now watch the TV programme with a time shift
from the time you pressed the PAUSE button. The Playback
symbol appears in place of the Pause symbol .
Jump to automatically set bookmarks
With time-shift television, and with the status display showing, you can
skip to automatically set bookmarks or to the start or end of the cur-
rent recording. White bookmarks mark the beginnings and endings of
broadcasts.
Red button: Jump back
Blue button: Jump forwards
Bon(n) jour Berlin
09:56
Language/sound
Follow me
Bon(n) jour Berlin
09:56
Language/sound
Switch to live picture
Press STOP button.
You see the station's live picture again.
Jumping
You can jump during time shift viewing by briefly pressing the buttons
in the jump distance set; this enables you to skip uninteresting
sections quickly.
Jump forwards.
09:45-10:00
09:45
Jump backwards.
10:00
09:45-10:00
09:45
Smart Jump
If Smart Jump is activated, the jump width is halved every time you change
the jump direction. The jump width is doubled if you jump more than
three times in the same direction (max. 8 min.).
09:45-10:00
09:45
: Jump width corresponds to the jump width preset
in the Digital Recorder menu.
: Jump width is less than preset in the Digital Recorder
menu (e.g. after changing the jump direction).
: Jump width is greater than preset in the Digital
Recorder menu (e.g. after jumping three times in the
same direction).
10:00
For example, you are searching for the beginning of a broadcast that
has already started.
Press repeatedly to jump back.
If you have jumped past the beginning of the programme,
jump in the opposite direction:
This jump in the opposite direction is only carried out
for half the jump distance. Jump forward using
If you have jumped past the start of the programme:
Jump back again. In the process, the jump distance
is cut in half again.
By halving the jump distance when changing direction
again you can find your way to a specific place.
Bon(n) jour Berlin
DR archive
Language/sound
Bon(n) jour Berlin
09:56
Language/sound
Bon(n) jour Berlin
09:49
Language/sound
09:58
10:00
10:00
10:00
.
93 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Connect 40 3dConnect

Table of Contents