Daily Operation (Continued); 3D Function - Loewe Connect 32 3D Operating Instructions Manual

Daily operation

3D function

You can use the 3D functionality of your TV set to display 3D material
transmitted by a channel or from an external player that is connected.
You require a pair of Loewe Active 3D Glasses to be able to use the 3D
functionality in its entirety (see Accessories on page 146). Please read
the operating instructions included with the 3D glasses.
3D settings
Using the 3D settings you can select the correct display format, should
this not have been detected automatically. What's more, you can choose
to view 3D material in 2D or "traditional" 2D material in 3D.
For 3D content that is being played back from an external HDMI player,
the 3D display format is normally recognised correctly when the factory
setting 3D mode automatic is selected. You may need to set the 3D
mode manually to view 3D content from broadcasters.
➠ Owing to a reduction in the luminance in 3D mode for technical rea-
sons, the Auto dimming - Room (see page 38) is deactivated when
showing 3D content.
➠ If the TV set is operated with the remote control during a 3D playback,
flicker effects can occur in the 3D glasses during this.
MENU: Call TV menu.
Select Picture,
go to the menu line below.
Select 3D,
go to the menu line below.
TV MENU
Picture
3D
2D->3D 3D mode
off
Select the desired function,
go to the menu line below.
Set the changes.
- 40
3D->2D
...
Explanations of the 3D settings:
2D->3D
on/off If you set 2D->3D to on, all 2D image material will be
displayed in 3D. You will need to wear the 3D glasses to
view it properly.
➠ The 2D->3D conversion is not available for the
Connect 32 3D.
3D mode
off Here you can deactivate the 3D mode of the TV set. The
TV set shows the 2D/3D image material in the same way
as it is provided by the station or external player.
automatic If the TV is set to this setting (factory setting), then the TV
set automatically switches over to the correct 3D mode,
if this is possible.
Only change the setting if the 3D content is not displayed
correctly.
To display 3D content in side by side format. When view-
side by side
ing 3D content with this setting, two almost identical
images are displayed next to each other and put together
correctly by the TV set.
➠ The 3D mode is automatically reset the next time you
switch on the TV set.
To display 3D content in top/bottom format. When view-
top/bottom
ing 3D content with this option, two almost identical im-
ages are displayed one above the other and put together
correctly by the TV set.
➠ The 3D mode is automatically reset the next time you
switch on the TV set.
Games To display 3D content in full picture format. When viewing
3D content with this option, two almost identical images
are displayed as full pictures and put together correctly
by the TV set.
➠ The 3D mode is automatically reset the next time you
switch on the TV set.
3D->2D
on/off If you set 3D->2D to on, the 3D material from both TV
stations and from external players will be changed into
2D and played back. The three dimensional (3D) effect
will disappear. You will not need to wear the 3D glasses
to view it properly.