Table of Contents
Advertisement
Software update
Load new software package
Only the parts of the software package that are not up to
date will be automatically downloaded from the internet
and updated.
Each part of the software is downloaded individually from
the internet and is then programmed.
The total time required for all the software parts to be
downloaded from the internet is dependent on the speed
of data transfer that is being used.
The total loading and programming process can take up
to 50 minutes in total.
Please do not switch off your TV set at the mains during
the entire loading and programming process.
SOFTWARE UPDATE
The "TV base software" is being programmed, please wait ...
Note:
The total time required for the loading process from the internet is dependent
on the type of data transfer that is being used:
- up to 125 minutes over a modem (56k)
- up to 110 minutes over ISDN (64k)
- up to 5 minutes over DSL (DSL2000).
The loading and programming process can take up to approx. 50 minutes
in total.
Please do not switch off your TV set at the mains during the entire loading
and programming process.
You will be informed once the loading and programming
process is complete.
SOFTWARE UPDATE WIZARD
The software package has been loaded successfully.
Please switch the TV set off and back on at the mains switch to ensure it is fully
operable.
To make your TV set completely ready for use again, please
turn it off and on again at the mains.
135 -
Advertisement
Table of Contents
