Loewe Connect 32 3D Operating Instructions Manual page 111

Digital Recorder
Checking the hard disc
You can check the integrated hard disc of the TV set
with the Digital Recorder function occur.
Call TV menu.
Select Settings,
switch to the menu line below.
Select Miscellaneous,
switch to the menu line below.
Select Check integrated hard disk,
OK activate.
ATTENTION
The hard disk check can be launched by pressing the confirmation key
and can take up to 20 minutes?
Start check
Red button: Start check.
After the check, a message will appear on the screen
showing the results of the check and tips on how to
resolve any problems that are present, should there be
any.
➠ After the check, the TV set must be re-started.
Or:
END: Cancel the operation.
only for TV sets with DR + .
(1
Formatting the hard disc
(1 , e.g. if problems If problems were detected when the hard disc was being tested (see left
column), re-formatting may be able to remedy the problem.
Additionally, you can re-format the hard disc in order to quickly and easily
delete all the data stored on it.
Attention!
Formatting of the hard disk deletes all the data saved on it!
No, cancel the operation
Note on formatting external USB discs:
The TV set uses the hard disc file system FAT32. The file system NTFS is
not supported. PCs with the operating system Microsoft Windows only
support a total hard disc volume of 32GB when formatting on FAT32.
Larger hard discs are automatically reduced in their capacity by this.
Format external USB discs that you wish to use with the TV set as de-
scribed above.
Call TV menu.
Select Settings,
switch to the menu line below.
Select Miscellaneous,
switch to the menu line below.
Select Format integrated hard disk
hard disk,
OK activate.
ATTENTION
If the formatting of the hard disc is confirmed by pressing the
then the TV switches itself off and then back on, and the formatting of the
herd disc starts automatically. Attention! This process will delete all data
stored on the hard disc.
Do you really want to format the hard disc?
Start formatting
Red button: Start formatting.
➠ After the formatting, the TV set must be re-started.
Or:
END: Cancel the operation.
or Format external
(1
button
No, cancel the operation
111 -