Table of Contents
Advertisement
Click the Save link in the upper right corner of the web configurator to save your configuration
6
permanently.
The DHCP server can then assign a specific IP address based on the DHCP request.
7
6.2.4 Troubleshooting
Check the client A's IP address. If it did not receive the IP address 172.16.1.18, make sure:
Client A is connected to the Switch's port 2 in VLAN 102.
1
You configured the correct VLAN ID, port number and system name for DHCP relay on both the DHCP
2
server and the Switch.
You clicked the Save link on the Switch to have your settings take effect.
3
6.3 How to Use PPPoE IA on the Switch
You want to configure PPPoE Intermediate Agent on the Switch (A) to pass a subscriber's information to
a PPPoE server (S). There is another switch (B) between switch A and server S. Switch B is connected to
switch A. In this way, PPPoE server S can identify subscriber C and may apply different settings to it.
Chapter 6 Tutorials
MES3500-24S/MGS3520 Series User's Guide
54
Advertisement
Table of Contents
Troubleshooting
