Table of Contents
Advertisement
Figure 127 Advanced Application > Multicast > MVR
The following table describes the related labels in this screen.
Table 94 Advanced Application > Multicast > MVR
LABEL
DESCRIPTION
Active
Select this check box to enable MVR to allow one single multicast VLAN to be shared among
different subscriber VLANs on the network.
Group Name
Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes.
Multicast VLAN ID
Enter the VLAN ID (1 to 4094) of the multicast VLAN.
802.1p Priority
Select a priority level (0-7) with which the Switch replaces the priority in outgoing IGMP control
packets (belonging to this multicast VLAN).
Mode
Specify the MVR mode on the Switch. Choices are Dynamic and Compatible.
Select Dynamic to send IGMP reports to all MVR source ports in the multicast VLAN.
Select Compatible to set the Switch not to send IGMP reports.
Port
This field displays the port number on the Switch.
*
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Chapter 25 Multicast
MES3500-24S/MGS3520 Series User's Guide
217
Advertisement
Table of Contents
Troubleshooting
