Table of Contents
Advertisement
Click the Port link at the top right corner.
5
The DHCP Snooping Port Configure screen appears. Select
6
Trusted in the Server Trusted state field for port 5 because the DHCP server is connected to port 5. Keep
ports 6 and 7 Untrusted because they are connected to DHCP clients. Click Apply.
Go to Advanced Application > IP Source Guard > DHCP snooping > Configure > VLAN, show VLAN 100
7
by entering 100 in the Start VID and End VID fields and click Apply. Then select Yes in the Enabled field of
the VLAN 100 entry shown at the bottom section of the screen.
If you want to add more information in the DHCP request packets such as source VLAN ID or system
name, you can also select the Option82 and Information fields in the entry. See
236.
Chapter 6 Tutorials
MES3500-24S/MGS3520 Series User's Guide
49
Section 27.1.1.3 on page
Advertisement
Table of Contents
Troubleshooting
