Table of Contents
Advertisement
Figure 84 Advanced Application > Mirroring > RMirror-Destination
The following table describes the labels in this screen.
Table 56 Advanced Application > Mirroring > RMirror-Destination
LABEL
DESCRIPTION
Active
Select this check box to enable the rule. Clear this check box to disable it.
RMirror VLAN ID
Enter the ID number of the RMirror VLAN over which the mirrored traffic is forwarded.
Monitor Port
Specify the port to which you copy the traffic in order to examine it in more detail without
interfering with the traffic flow on the original port(s).
Tagging
Select whether to add the RMirror VLAN tag to mirrored traffic on the monitor port.
Apply
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the nonvolatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Chapter 16 Mirroring
MES3500-24S/MGS3520 Series User's Guide
154
Advertisement
Table of Contents
Troubleshooting
