Therefore in the following example, the Switch can learn host A's MAC address from the ARP request
sent by host A. The Switch then forwards host B's ICMP reply to host A right after getting host B's MAC
address and ICMP reply.
40.2 ARP Setup
Click IP Application > ARP Setup in the navigation panel to display the screen as shown. Click the link
next to ARP Learning to open a screen where you can set the ARP learning mode for each port.
Figure 217 IP Application > ARP Setup
40.2.1 ARP Learning
Use this screen to configure each port's ARP learning mode. Click the link next to ARP Learning in the IP
Application > ARP Setup screen to display the screen as shown next.
Chapter 40 ARP Setup
MES3500-24S/MGS3520 Series User's Guide
336