Adjusting The Blade Speed - Hayter CODE543A Operator's Manual

1. Self-propel speed control
2. BOOST MAX button
3. Self-propel drive handles

Adjusting the Blade Speed

This machine has 2 speed settings, 'AUTO' (POWER
BOOST) and MAX (BOOST MAX).
When set to AUTO, the blade speed is adjusted
automatically for greater efficiency; changes in
cutting conditions are detected and the blade speed
increases when necessary to maintain quality of cut.
When set to BOOST MAX (2), the blade speed
remains at the highest speed at all times. Ideal for
tougher conditions. Figure 11.
Press the BOOST MAX button (2) below the power
button to set the machine to BOOST MAX speed.
Note: Running the machine permanently in 'BOOST
MAX' mode will reduce the expected battery run
time.
©2021 - Toro U.K. Limited
Spellbrook, Bishop's Stortford,
Hertfordshire, CM23 4BU
Figure 11
17
Printed in UK
All Rights Reserved