Operation; Before Operation; Installing The Battery Pack - Hayter CODE543A Operator's Manual

Operation

Note: Determine the left and right sides of the machine from the normal operating position.

Before Operation

Installing the Battery Pack

Important: Operate the battery pack only in temperatures that are within the appropriate range; refer to
Specifications.
1. Ensure that the safety key is not installed in the machine.
2. Ensure that the vents on the battery are clear of any dust and debris.
3. Lift up the battery-compartment lid. A of Figure 7.
4. Line up the cavity in the battery pack with the tongue on the machine and slide the battery pack into
the compartment until it locks into place. B of Figure 7.
5. Close the battery compartment lid. C of Figure 7.
Note: If the battery-compartment lid does not close completely, the battery is not fully installed.
©2021 - Toro U.K. Limited
Spellbrook, Bishop's Stortford,
Hertfordshire, CM23 4BU
Figure 7
14
Printed in UK
All Rights Reserved