Configuring Notifications - Siemens SITRANS SCM IQ Operating Instructions Manual

Procedure
1. Start SITRANS SCM IQ in Insights Hub.
2. Navigate to the "Device configuration"
3. Click "Connect device" or "Add sensors"
4. Select "Connect sensor" and choose an existing gateway from the drop-down menu.
5. Click "Next".
6. Enter a name and the MAC address for the sensor. You find the MAC address on the
SITRANS MS200 nameplate.
7. To map the SITRANS MS200 to an asset in the Insights Hub Asset Structure, click on "Browse"
at "Asset and position".
8. Choose an asset and enter additional information on the sensor position.
9. Click "Save".
Result
SITRANS MS200 will now be automatically assigned to the SITRANS CC220 and transfer data to
the chosen Asset of Asset type SITRANS MS200.
7.10

Configuring notifications

Configured users will receive notifications when an anomaly is detected by the application. To
configure the anomaly detection model please refer to Training anomaly detection models
(Page 57).
For more information, watch this video
v=AJLLbYmtN2A&t=352s).
SITRANS SCM IQ: Smart Condition Monitoring with IIoT Sensors
Operating Instructions, 07/2023, A5E50573389-AD
①
tab.
②
on an existing gateway.
(https://www.youtube.com/watch?
Commissioning
7.10 Configuring notifications
55