Page 2
Notices in the relevant documentation must be observed. Trademarks All names identified by ® are registered trademarks of Siemens AG. The remaining designations in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Page 3
Tel.: +49 - (0)371 - 45 00 48-0 Fax.: +49 - (0)371 - 45 00 48-11 www.agilion.de service@agilion.de Management: Andreas Werner Johannes Waldhör Sven Sieber HR B 21249 Chemnitz VAT ID no.: DE236591552 SIMATIC RTLS PCB OEM PULSE Manual, 10/2018, C79000-G8976-C552-01...
1 Dimensions, connections and LEDs 1.1 Dimensions The antenna is connected to the PCB via a 5 cm long U.FL cable. The contacts used are P3 on the PCB and P1 on the antenna. Drill holes SIMATIC RTLS PCB OEM PULSE Manual, 10/2018, C79000-G8976-C552-01...
Indicates radio activity Transponder is not in operation 1.3 Solder contact P4 Description/function Grounding Rx - Input on the transponder, 3.3 V Tx - Output on transponder, 3.3 V Supply voltage, 3.3 V SIMATIC RTLS PCB OEM PULSE Manual, 10/2018, C79000-G8976-C552-01...
Rx - Input on the transponder, 3.3 V Tx - Output on transponder, 3.3 V Grounding Supply voltage, VCC, 3.3 V ±100 mV 1.5 P2 connector Internal interface for production and manufacturing test, do not use. SIMATIC RTLS PCB OEM PULSE Manual, 10/2018, C79000-G8976-C552-01...
44 x 24 x 7.5 mm Antenna dimensions 38 x 20 x 3 mm Weight Approx. 10 g Temperature range 0 to +50 ℃ Method of securing PCB: 3 screws, Ø 1.7 mm Antenna: provided by customer SIMATIC RTLS PCB OEM PULSE Manual, 10/2018, C79000-G8976-C552-01...
2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Applied standard: • EN 50581 Technical documentation for the assessment of electrical and electronic products with respect to restriction of hazardous substances SIMATIC RTLS PCB OEM PULSE Manual, 10/2018, C79000-G8976-C552-01...
Do not dispose of the products at public disposal sites. For environmentally compliant recycling and disposal of your electronic waste, please contact a company certified for the disposal of electronic waste or your Siemens representative. Note the different national regulations.