Installation Instructions Sitrans Ms200; Basic Safety Notes Sitrans Ms200 - Siemens SITRANS SCM IQ Operating Instructions Manual

5.2

Installation instructions SITRANS MS200

5.2.1

Basic safety notes SITRANS MS200

Unsuitable connecting parts
Risk of injury or poisoning.
In case of improper mounting, hot, toxic, and corrosive process media could be released at the
connections.
• Ensure that connecting parts are suitable for connection and process media.
Note
Material compatibility
Siemens can provide you with support concerning selection of parts wetted by process media.
However, you are responsible for the selection of parts. Siemens accepts no liability for faults or
failures resulting from incompatible materials.
Hot surfaces resulting from hot process media
Risk of burns resulting from surface temperatures above 65 °C (149 °F).
• Take appropriate protective measures, for example contact protection.
• Make sure that protective measures do not cause the maximum permissible ambient
NOTICE
Condensation in the device
Damage to device through formation of condensation if the temperature difference between
transportation or storage and the mounting location exceeds 20 °C (36 °F).
• Before taking the device into operation, let the device adapt for several hours in the new
SITRANS SCM IQ: Smart Condition Monitoring with IIoT Sensors
Operating Instructions, 07/2023, A5E50573389-AD
WARNING
CAUTION
temperature to be exceeded. Refer to the information in Technical specifications (Page 85).
environment.
5.2 Installation instructions SITRANS MS200
Installing/mounting
37