Related Manuals for Siemens SITRANS LG Series
Summary of Contents for Siemens SITRANS LG Series
- Page 1 Introduction Procedure SITRANS Performing a firmware update on SITRANS LG series Application examples 08/2020 AG061815...
- Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
-
Page 3: Table Of Contents
Table of contents Introduction ............................4 Objective ..........................4 Equipment ........................... 4 Disclaimer..........................4 Procedure ............................... 5 Steps to updating firmware ....................5 Performing a firmware update on SITRANS LG series Application examples, 08/2020, AG061815... -
Page 4: Introduction
Introduction Objective The objective of this application guide is to help the user become familiar with the steps required to update firmware on SITRANS LG series. Equipment Equipment Article No. SITRANS LG 7ML588X Disclaimer Note While every effort is made to verify the following information, no warranty of accuracy or usability is expressed or implied. -
Page 5: Procedure
2. Connect the LG device to your PC or laptop and double-click Sensor to start the sensor setup and maintenance wizard. 3. Click Maintenance. Performing a firmware update on SITRANS LG series Application examples, 08/2020, AG061815... - Page 6 Procedure 2.1 Steps to updating firmware 4. Click Software update. 5. Click Next. Performing a firmware update on SITRANS LG series Application examples, 08/2020, AG061815...
- Page 7 Procedure 2.1 Steps to updating firmware 6. Click Selection. 7. Locate and open the latest firmware file from your directory. Performing a firmware update on SITRANS LG series Application examples, 08/2020, AG061815...
- Page 8 2.1 Steps to updating firmware 8. Click Finish. The software update will now begin. 9. When the update is complete, you will see the following window: Congratulations, you’re finished! Performing a firmware update on SITRANS LG series Application examples, 08/2020, AG061815...