Table of Contents
Advertisement
d. Mowing
- Self-propeller function (Figure M)
The self-propelled mechanism engages by pressing the safety lever
on the handle.
Self-propelled mechanism ceases when you release this bar.
Pull the safety lever back towards the handle to mow without the self-
propelled mechanism.
- Work instructions
Mow dry grass as much as possible to save grass.
Adjust the cutting height so that the machine is not overworked.
Drive the machine at moderate speed (walking) along the belt as
straight as possible. For a perfect mowing result, the strips must
always overlap for a few centimetres
Do not back away.
Always work perpendicular to the slopes.
If the blades come into contact with a foreign object, immediately
turn off the engine. Wait for the blades to stop turning completely
and check that the unit has not been damaged. Only resume work if
the unit has not been damaged.
Turn off the appliance when taking long breaks during work and
carrying the appliance.
Wait for the blades to stop turning completely.
Clean the appliance after each use as described in the chapter
"Cleaning and maintenance".
6. MAINTENANCE
See figures O, and P.
Carry out maintenance and cleaning work when the engine is off and the
spark plug are out. Risk of injury!
Allow the tool to cool down before performing any maintenance or
cleaning work. The engine elements are hot. Risk of burns!
Wear gloves when handling the blades.
a. Cleaning and general maintenance tasks
- Do not tilt the unit sideways or forward. Service fluids may leak and
the engine may be damaged.
18
Advertisement
Table of Contents
