Table of Contents
Advertisement
- do not smoke when refuelling;
- avoid contact with the skin and inhalation of vapours;
- Clean the gasoline if you have spilled.
- Keep gasoline away from any spark, flame or other source of fire.
- Do not use gasoline and oil mixture.
- Use normal or super unleaded gasoline.
- Use only fresh and clean gasoline.
- Do not store gasoline for more than a month as its quality may be
reduced.
1. Unscrew the tank lid and pour gasoline to the lower edge of the filler
cap. Do not fill the tank flush so gasoline has room to expand.
2. Wipe the remaining gasoline around the tank cap and screw it back
in
5. UTILISATION
Start the device on a safe and flat ground, preferably not in tall grass. Make
sure that the cutting tools do not touch objects or the ground.
a. Start the engine (figure
- Pull the self-propeller bar and the operation control (3) in the
direction of the handle (1) and hold it.
- Pull the starter rope.
- If the engine starts, pull back slowly the starter rope.
b. Stop the engine (figure
- Release the bars (3). The engine turns off and the blade is slowed
down. Wait until the complete stop of the blade.
c. Throttle control
You can use the throttle to operate and stop machine
- Move the throttle control the FAST position. Operate the engine in
the FAST position.
- To stop the machine, put the throttle control to the STOP position
)
)
17
Advertisement
Table of Contents
