Related Manuals for Hyundai HTDT421RP-2
Summary of Contents for Hyundai HTDT421RP-2
- Page 1 PETROL LAWN MOWER HTDT421RP-2 WARNING: Read thoroughly the instruction manual before use.
-
Page 2: Safety Instructions
1. SAFETY INSTRUCTIONS Instructions Read the instructions carefully. Be familiar with the controls and proper use of the equipment. Never allow children to use this mower. If the mower is given to an other people, also give this manual. Also make sure that this person uses this device only after receiving the necessary instructions. - Page 3 Mow only under daylight or under good artificial light. Always have a good visibility. Avoid using the equipment on greasy grass, where possible. Always be sure of your walking on the slopes. Walk, never run. For lawn mowers, mow across slopes, never from top to bottom. ...
- Page 4 or embankments; if the tool must be used in these kinds of emplacements, take an extreme precaution and operate carefully the tool. The lawnmower safety systems or features shall not be tampered with or disabled; The operator should not alter or tamper with any sealed adjustments for the engine speed control.
- Page 5 o Before transporting, lifting or storing the mower. o If you leave the mower unattended or change the cutting height. o To remove and empty the collection bag. After striking a foreign object, turn off the engine and carefully inspect the mower for damage.
- Page 6 Do not smoke. Never refuel inside a room. Never store the tool and the fuel tank indoors where there is a naked flame, such as near a water heater. If fuel has spilled, do not attempt to start the machine, but move it away from the spill before starting to use it.
- Page 7 Symbols Read the instructions manual Risk of projections; keep bystanders away Sharp blades; Beware of cutting fingers and feet. Do not touch the blades until the tool is on a completely stop. Clean the area to be mowed, keep children and other people at a safe distance from the machine.
- Page 8 Description Technical data Model HTDT421RP-2 Power 1.9kW 127.1cm Cylinder capacity Engine speed 2900/min Cutting width 420mm Adjustable cutting height 6 positions Grass collection capacities 45 L weight 21.5 kg Guaranteed Sound Power Level 96 dB(A ) Sound power level Max.94.29 dB (A); K=1.05dB(A) Sound pressure level Max.81.5 dB (A) K= 3dB(A)
- Page 9 ASSEMBLY Handle Unfold handle carefully so as not to pinch or damage control cables. 1. Raise handles until lower handle section locks into place in mowing position. 2.Remove protective padding, raise upper handle section into place on lower handle and tighten both handle knobs. Mount the front wheel 1.
- Page 10 Open the flap then Install the grass catcher on the hook on the rear of the tool. Release the flap. Disassemble the grass catcher Lift the flap and remove the grass catcher. Side discharge Before using the side grass discharge, the grass collection basket removed.
-
Page 11: Adjust Cutting Height
ADJUST CUTTING HEIGHT Raise wheels for low cut and lower wheels for deep cut; adjust cutting height to suit your requirements. Medium position is best for most lawns. FILLING FUEL TANK a. Filling tank WARNING! Gasoline is extremely flammable. Store fuel in specially designed cans for this purpose. Fill the fuel tank only outdoors and before starting the engine. - Page 12 Fuel must meet the following criteria: Clean, new and lead-free gasoline. A minimum octane rating of 87/87 AKI (91 RON). For use at high altitudes, see below A gasoline containing up to 10% ethanol is acceptable. Remove the fuel tank cap. Add fuel. Close the fuel tank with the cap.
-
Page 13: Operation
OPERATION Start the device on a safe and flat ground, preferably not in tall grass. Make sure that the cutting tools do not touch objects or the ground. a. Start the engine Push 3 times the primer bulb. Pull the drive lever bar the operation control bar (control lever) in the direction of the handle and hold it. -
Page 14: Maintenance And Storage
If the blades come into contact with a foreign object, immediately turn off the engine. Wait for the blades to stop turning completely and check that the unit has not been damaged. Only resume work if the unit has not been damaged. Turn off the appliance when taking long breaks during work and carrying the appliance. - Page 15 Changing the Oil Have a container ready to catch the oil and remove the drain plug. We should incline machine to make sure all the oil could be go out. Once the oil has been emptied, replace the drain plug making sure that the washer is in place and wipe clean any spillages.
-
Page 16: Maintenance Schedule
MAINTENANCE SCHEDULE After 8 After Once Before After After5 SERVICE 50 h a year Mowing check and tighten nuts, bolts and screws Check the oil / fuel level and refill oil / fuel if necessary Clean control elements / ... -
Page 17: Declaration Of Conformity
ZI, 32 rue Aristide Bergès – 31270 Cugnaux - France Tel: +33 (0)5.34.502.502 Fax: +33 (0)5.34.502.503 Declares that the machines: PETROL LAWN MOWER Model: HTDT421RP-2 Serial No.: 20220117805-20220117994 Have been designed in compliance with the following standards: EN ISO 5395-1:2013+A1:2018 EN ISO 5395-2:2013+A1:2016+A2:2017... -
Page 18: Warranty
WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 19: Product Failure
PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 20: Warranty Exclusions
WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...