Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Hyundai Manuals
  4. Lawn Mower
  5. HTDT5273
  6. Instructions manual

Hyundai HTDT5273 Instructions Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
LAWN MOWER PETROL
HTDT5273
1

Advertisement

loading

Related Manuals for Hyundai HTDT5273

Summary of Contents for Hyundai HTDT5273

  • Page 1 LAWN MOWER PETROL HTDT5273...

  • Page 2: Table Of Contents

    CONTENTS 1. SAFETY INSTRUCTIONS 2. YOUR PRODUCT 3. ASSEMBLY 4. FILLING FUEL TANK 5. USE 6. MAINTENANCE AND STORAGE 7. EC DECLARATION...

  • Page 3: Safety Instructions

    1. SAFETY INSTRUCTIONS Instructions • Read the instructions carefully. Be familiar with the controls and proper use of the equipment. • Never allow children to use this mower. If the mower is given to an other people, also give this manual. Also make sure that this person uses this device only after receiving the necessary instructions.
  • Page 4 grass extractor. • Never take or carry the mower while the machine is running. • Stop the machine and remove the ignition key, disconnect the spark plug from the spark plug: Before cleaning or unclogging the grass extractor. Before checking, cleaning, and working on the mower. After hitting an object.
  • Page 5 • Regularly check that the bolts, nuts and screws are properly tightened for safe use of the mower. • Do not use the tool where there is a risk of lighting. • Avoid operating the lawnmower in slopes and near drop-offs, ditches or embankments. If it is really needed to use the tool on these locations, take an extreme precaution and stay in alert.
  • Page 6 Risk of injury to persons and property caused by flying objects. Prolonged use of this product exposes the operator to vibrations and can produce so-called "white finger" disease. To reduce the risk, wear gloves and keep your hands warm. If any of the symptoms of "white finger syndrome" occur, seek immediate medical attention. Symptoms of "white finger"...

  • Page 7: Your Product

    Guarantee sound power level 2. YOUR PRODUCT a. Description 1. Upper bar 3. Self-propeller bar 2. Operator control lever 4. Throttle control...

  • Page 8: Assembly

    11. Starter rope 7. Air filter 12. Lower bar 8. Cutting height lever 13. Flap of the lateral discharge 9. Flap 14. Lateral discharge b. Technical data Model HTDT5273 Nominal power 3.6kW Displacement 173cm³ Max engine speed 2850/min Cutting width 525mm...
  • Page 9 hooks. The flap should fit securely. To remove the grass catcher, remove the hooks from the bar and remove the tray. c. Setting of the cutting height According operation to be performed, adjust the desired cutting height; Grasp the lever, pull it to the right and then lower it to decrease the cutting height or raise it to increase the cutting height a) Side discharge...

  • Page 10: Filling Fuel Tank

    e. Back discharge If need to use the back discharge function, screw out the bolt about 40mm. To use the back discharge function you must open the ejector flap slightly. The mulching adapter is not allowed to be fitted when the rear ejector is used. 4.

  • Page 11: Use

    Recommended oil: We recommend the use of high quality detergent oil classified for SF, SG, SH, SJ or higher. Do not use special additives. Filling oil tank Open the oil tank. Fill directly the oil in the tank. Do not overfill. Close the oil tank.

  • Page 12: Maintenance And Storage

    handlebars. Take hold of the starter handle firmly with the other hand. Pull back the starter until you feel resistance and then pull the handle firmly and briskly to turn the engine Repeat the above procedure as necessary until the engine starts. When starting from cold, gradually move the throttle lever to the full throttle position after a few moments of running.
  • Page 13 Before working on the cutting system of the machine, switch off the engine and remove the spark plug’s cap. Regular, careful maintenance is essential for keeping the safety level and original performance of the machine unchanged in time. Lack of maintenance or improper maintenance can quickly damage the machine and give poor work results.
  • Page 14 Store your mower in a dry, well-ventilated area, away from flames, sparks or heat sources. If the storage area is accessible to children, immobilise the machine by disconnecting the spark plug’s cap. Storing the mower beneath a tarpaulin or similar cover is not recommended as it may cause a build‐up of condensation resulting in corrosion of the mower.
  • Page 15 present, clean and in good condition. Position the blade on its support with the cooling fins facing the engine. Check the correct alignment and matching of pads with the blade. The blade must be positioned precisely on its stand. Tighten the screws connecting all of the components. Make a final visual check that all parts are present and aligned before tightening the fixing bolt very firmly with a wrench while holding the blade firmly in one hand (NB wear suitable gloves).

  • Page 16: Ec Declaration

    32, rue Aristide Bergès -Z1 31270 Cugnaux - France Tel. +33 (0) 5.34.502.502 Fax: +33 (0) 5.34.502.503 Declares that the machine named below LAWN MOWER PETROL HTDT5273 Serial number: 20190112738-20190112961 Complies with the following European Directives: Machinery Directive 2006/42/EC EMC Directive 2014/30/EU...