Table of Contents
Advertisement
lever (20) in the direction of the bar.
- Secure the control cables to the handlebars with cable clamps (5).
d. Grass catcher (figure
- Place the synthetic tabs (28) on the grass catcher (27).
- Insert the handle into the grass catcher and secure it with the
attached screw.
-
Install the grass catcher on the device.
NOTE: When using the grass catcher, do not use the mulching device
and the lateral discharge in same time. These two functions must be
removed first.
Disassemble the grass catcher
- Lift the flap and remove the bag.
- Empty the grass catcher (see chapter 'Disposal / protection of the
environment') and put it back in place
e. Mulching kit (Figure
Before using the mulching kit, the side discharge duct must be
removed
- Remove the grass catcher, if fitted.
- Lift the flap (6).
- Insert the mulching kit (23). The security button inking.
Remove the mulching kit
- Lift the baffle (6).
- Push the safety button down and remove the mulching kit (23).
f. Lateral discharge duct
Before using the side grass discharge, the grass collection basket
removed.
- Fix the lateral ejection duct
- Lift the lateral baffle.
- Hook the side discharge duct and lower the lateral baffle. It keeps
the lateral discharge duct in position.
and
)
)
15
Advertisement
Table of Contents
