1. GETTING TO KNOW YOUR MACHINE 1.1. How to read the manual. 1.1.1. Certain paragraphs in the manual contain particularly significant information and are marked with various levels of highlighting with the following meaning: NOTE or Non-observance Non- observance Read Manual Indicates a hazard IMPORTANT will result in the...
2. SAFETY REQUIREMENTS. 2.1. Your machine must be used carefully. 2.1.1. Symbols have therefore been placed on various parts of the machine to remind you of the main precautions to be taken. 2.1.2. Their meaning is explained below. You are also asked to carefully read the safety regulations in the specific chapter of this manual.
Page 5
3.1. General power tool safety. 3.1.1. Work area safety. 3.1.1.1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 3.1.1.2. Do not operate power tools in explosive atmospheres’, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Page 6
3.1.4.3. Remove the battery from its compartment before making any adjustments, changing accessories, or storing the power tool. Such preventive safety measures reduce the risk of starting the power tool accidentally. 3.1.4.4. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
5. LAWNMOWER ASSEMBLY The safety rules must be observed during machine use. Before starting the Machine, read the instructions regarding personal safety and the safety of unauthorized persons. Keep the instructions in a good state for future use 5.1. Assembly of the handle; 5.1.1.
Page 10
5.3. Installing the grass catcher (For rear bagging option). 5.3.1. Lift the rear discharge guard. 5.3.2. Lift the grass catcher by its handle and place under the rear guard so that the hooks on the grass catcher frame are seated into the slots in the handle bracket. 5.3.3.
Page 11
5.7.2. When charging batteries, only use battery chargers recommended by the Manufacturer. Battery chargers are generally designed for use with specific types of batteries; fire risks can occur if other types are used. 5.7.3. Use the batteries specifically designed for your power tool only. The use of other batteries may be hazardous and cause injuries and cause injury.
6. OPERATION 6.1. Always make sure your footing is on firm ground. 6.2. Set the desired cutting height. 6.3. Put the battery pack, press the lock-out button with his right hand and hold the top handle and On/Off control lever with your left hand. 7.
Page 13
1.1.2.3. The recharging phases are indicated by the charge status lights (6), 1.1.2.4. Battery charger connected = Green charge light (4) is on. 1.1.2.5. Battery inserted and recharging in progress = Green power light (3) on and Charge light (4) on (Red when charging). 1.1.2.6.
Page 14
7.5. Cleaning. DO NOT let water into the device. 7.5.1. Keep the handle clean and dry. 7.5.2. Clean the equipment immediately after use. Let grass is dry, otherwise the performance of the device adversely affected. Page 14 Rev 2...
Cutting height set too low. Raise the Raise the cutting height. cutting height. Motor stops while cutting Battery no power. Charge the battery. 9. SPECIFICATION HYM36Li Lawnmower Battery charger supply vac/hz 230/50 Battery type Samsung Lithium ion Battery voltage vdc Battery capacity Ah...
10. ENVIRONMENTAL 10.1. Do not dispose of electric equipment together with household waste material! In observance of European Directive 2012/19/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
12. DECLARATIONS OF CONFORMITY 12.1. Genpower Ltd confirms that this Hyundai product conform to the following CE Directives; 12.1.1. 2006/42/EC Machinery Directive 12.1.2. 2004/108/EC EMC Directive 12.1.4. 2000/14/EC, Amended by2005/88/EC (as amended) Page 17 Rev 2...
Need help?
Do you have a question about the HYM36LI and is the answer not in the manual?
Questions and answers