Table of Contents
Advertisement
Stop the blades if the mower is to be tilted during transport when crossing
surfaces other than grass, and when transporting the mower due to the
area to be mowed.
Do not mow on steep slopes.
Use extreme caution when tipping or pulling the mower towards you.
Never use the mower with defective guards, or without safety devices
such as baffles and or collection bins, which are not in place.
Do not change the motor configuration or increase the speed.
For starting, disengage all blades, the gears must be in neutral, the
traction control lever must be released. Set foot well away from the
blades.
Before starting the engine or starting the engine, carefully read and
understand all instructions.
Do not tilt the mower when starting the machine or turn on the engine,
unless the mower needs to be tilted for starting. In this case, do not tilt it
more than absolutely necessary and lift only the part that is furthest away
from the user.
Do not start the machine by standing in front of the ejection
Do not place hands or feet near or under rotating parts. Keep clean the
mouth of the grass extractor.
Never take or carry the mower while the machine is running.
Stop the machine and remove the ignition key, disconnect the spark plug
from the spark plug:
o Before cleaning or unclogging the grass extractor.
o Before checking, cleaning, and working on the mower.
o After hitting an object. Inspect the mower for damage and repair
before re-using the mower.
o If the mower begins to vibrate abnormally, stop the engine
immediately and check according to previous recommendations.
Stop the engine immediately:
o Every time you leave the craft.
o Before refuelling.
To stop the engine, reduce the throttle setting, turn off the ignition and
release the operator presence grip, close the fuel cock (depending on the
equipment).
Move slowly when moving.
Maintenance and storage
Check, check and tighten all bolts, bolts, and screws to ensure that the
equipment is in safe operating condition.
Never keep the mower with gasoline in the tank in a building or vapours
can cause a bright flame or spark.
Allow the machine to cool before storing it in an enclosed area.
03
Advertisement
Table of Contents
