Wheels And Tyres; Tyre Pressure; Steering Assembly - VESPA GTV 250 i.e. 2008 Service Station Manual

Vespa GTV 250 i.e.
Specification
9 No. 9 - Live Stop light and
Starter key
10 No. 10 - Power to tail light
and instrument panel light-
ing
Frame and suspensions
Specification
Front suspension
Front shock absorber axial travel
Rear suspension
Rear shock absorber axial travel
Brakes
Specification

Wheels and tyres

Specification
Front wheel
Rear wheel
Front tyre
Rear tyre
Specification
Front tyre pressure
Rear tyre pressure
Rear tyre pressure - driver and passenger
N.B.
CHECK AND ADJUST TYRE PRESSURE WITH TYRES AT AMBIENT TEMPERATURE. REGU-
LATE PRESSURE ACCORDING TO THE WEIGHT OF BOTH RIDER AND ACCESSORIES
Tightening Torques
Upper steering ring nut
Desc./Quantity
7.5 A
7.5 A
CHASSIS AND SUSPENSIONS
Type
BRAKES
Front
Rear
WHEELS AND TYRES

TYRE PRESSURE

STEERING ASSEMBLY

Name
Desc./Quantity
Unitised body made of stamped plate
Single arm suspension (cantilever wheel) fitted with a dual-
chamber hydraulic shock absorber with coaxial spring.
86.5 mm
Engine based on swingarm balanced on the chassis by means
of an arm with 2 degrees of freedom. Pair of double action hy-
draulic shock absorbers and coaxial springs with adjustment of
the preload on 4 positions
89.5 mm
Desc./Quantity
Ø 220 disc brake and floating calliper with Ø 25 mm twin plung-
ers and hydraulic control (lever on the far right end of the
handlebar)
Ø 220 disc brake and calliper with two Ø 30 mm counteracting
plungers and hydraulic control (lever on the far left end of the
handlebar)
Desc./Quantity
Alloy wheel rims: 12" x 3.00"
Alloy wheel rims: 12" x 3.00"
Tubeless 120/70-12" 51P
Without inner tube: 130/70-12" 62P
Desc./Quantity
1.8 bar
2 bar
2.2 bar
Torque in Nm
35 - 40
Technical Data
DT - 15