Vespa GTV 250 i.e.
Refitting the wheel axle bearing
- Support the hub cover on a wooden surface.
- Heat the crankcase cover with the specific heat
gun.
- Fit the wheel shaft bearing with a modular punch
as shown in the figure.
- Fit the Seeger ring.
- Fit the oil seal with seal lip towards the inside of
the hub and place it flush with the internal surface
by means of the appropriate tool used from the 52-
mm side.
The 52-mm side of the adapter must be turned to-
wards the bearing.
Specific tooling
020376Y Adaptor handle
020360Y 52 x 55 mm adaptor
020483Y 30-mm guide
Engine
ENG - 109