VESPA GTV 250 i.e. 2008 Service Station Manual page 247

Vespa GTV 250 i.e.
- Remove the electric saddle opening switch, the
fuse box and the manual saddle opening cable as
shown in the photograph
Taillight assy.
- Operate the screw indicated in the figure to re-
move the rear turn indicator
Remove screw «A» to remove the rear light as-
sembly.
Access to tail light bulbs, stop light bulb and li-
cence plate light.
To reassemble, repeat the operation but in reverse
order.
N.B.
IF MISTING IS NOTICED ON THE INSIDE OF THE HEAD-
LAMP GLASS, THIS DOES NOT INDICATE AN ABNOR-
MALITY AND IS RELATED TO HUMIDITY AND/OR LOW
TEMPERATURES.
IT WILL DISAPPEAR QUICKLY WHEN THE HEADLIGHT IS
TURNED ON.
IF HOWEVER THERE ARE DROPS OF WATER, IT MIGHT
MEAN SEEPAGE AND YOU SHOULD SEE AN AUTHOR-
IZED SERVICE CENTRE.
Chassis
CHAS - 247