VESPA GTV 250 i.e. 2008 Service Station Manual page 85

Vespa GTV 250 i.e.
- Remove the lambda probe from the manifold.
CAUTION
WARNING
SHOULD IT BE NECESSARY TO REMOVE ONLY THE SILENCER TIP, ALWAYS REPLACE THE
GRAPHITE GASKET BETWEEN THE PRIMARY PIPE AND SILENCER.
Removal of the engine from the vehicle
- Disconnect the battery
- Remove the helmet compartment
- Remove the side fairings and the spoiler termi-
nals.
Remove the full muffler assembly.
- Remove the air cleaner housing by unscrewing
the 3 screws indicated in the photograph.
CAUTION
THIS OPERATION MUST BE CARRIED OUT WHEN THE
ENGINE IS COLD.
- Remove the clamp off the blow-by pipe and take
the pipe out.
- Remove the clamp indicated in the photograph
and disconnect the bellows connected to throttle
body.
Engine from vehicle
ENG VE - 85