VESPA GTV 250 i.e. 2008 Service Station Manual page 199

Vespa GTV 250 i.e.
Suspensions
- Remove the oil seal on the roller bearing side
using a screwdriver
- Remove the roller bearing using the specific tool
Specific tooling
020376Y Adaptor handle
020456Y Ø 24 mm adaptor
020363Y 20-mm guide
- Heat the roller bearing seat with a heat gun
- Use the specific tool to introduce and push the
bearing until it stops, with the shielded side facing
out
- Refit the ball bearing check Seeger ring
Specific tooling
020151Y Air heater
020376Y Adaptor handle
020359Y 42 x 47 mm Adaptor
020412Y 15-mm guide
- Use the specific tool to fit and push the roller cas-
ing until it stops
- Refit the oil seal on the roller bearing side
- Lubricate the area between the roller bearing and
the ball bearing
Specific tooling
020038Y Punch
Recommended products
Lubricant grease Lithium and medium fibre
yellow brown coloured grease suitable for var-
ious uses.
SUSP - 199