Removing The Driven Pulley - VESPA GTV 250 i.e. 2008 Service Station Manual

Vespa GTV 250 i.e.
Plastic roller
- Check that the roller does not show signs of wear
and that it turns freely.
- Remove the special clamping screws as indica-
ted in the picture
- Check the outer diameter of the roller does not
have defects that could jeopardise belt functioning
- For refitting, place the roller with the belt contain-
ment edge on the engine crankcase side
- Tighten the wrench to the prescribed torque.
Locking torques (N*m)
Anti-flapping roller
12 - 16

Removing the driven pulley

- Remove the clutch housing and the driven pulley
assembly.
N.B.
THE UNIT CAN ALSO BE REMOVED WITH THE DRIVING
PULLEY MOUNTED.
Engine
ENG - 93