Wheels And Tyres; Secondary Air - VESPA LXV 50 Service Station Manual

Characteristics
Specification
Front suspension
Front suspension stroke
Trail (suspension rebounded/compressed)
Rear suspension
Rear suspension travel:
Brakes
Specification
Front brake
Rear brake

Wheels and tyres

Specification
Front tyre size
Rear tyre size
Front tyre pressure
Rear tyre pressure:
Light alloy rims (Front rim)
Light alloy rims (rear rim)
N.B.
CHECK AND ADJUST TYRE PRESSURE WITH TYRES AT AMBIENT TEMPERATURE. ADJUST
PRESSURE ACCORDING TO THE WEIGHT OF RIDER AND ACCESSORIES.

Secondary air

Follow these steps to clean the sponge filters of
the secondary air system:
1) Remove the snap-on plastic cover (1) on the
transmission cover using a small screwdriver as a
lever on the retaining tongues in order to insert one
of the three slots found on that cap.
2) Wash the polyurethane sponge with water and
soap, dry all components with compressed air and
refit to place. Refit the intake cap respecting the
angle reference.
3) Undo the two fixing screws (2) on the aluminium
cover of the secondary air housing in order to
reach the polyurethane sponge inside that hous-
ing; clean as indicated in point 2) and refit all
CHAR - 10
Single arm suspension with swinging arm articulated to the
steering tube. Hydraulic double-acting shock absorber and co-
Single hydraulic double-acting shock absorber, helicoidal co-
axial spring. Chassis engine support with swinging arm.
BRAKES
Disc brake (Ø 200 mm) with hydraulic control (lever on the far
right of the handlebar) and fixed calliper.
WHEELS AND TYRES
Vespa LXV 50
Desc./Quantity
axial spring
70 mm
71/68 mm
83.5 mm
Desc./Quantity
Ø110 mm drum brake
Desc./Quantity
110/70"-11"
120/70-10"
1.6 bar
2 bar
2.50" x 11"
3.00 x 10"