xFusion Digital Technologies FusionServer 2288H V7 Manual page 72

FusionServer 2288H V7 Server
Technical White Paper
Configuratio
n
24 x 2.5" drive
NVMe
configuration
6
● a: NVMe drives are supported when CPU 2 is configured. A single-CPU server
● For details about the optional components, consult the local sales
Drive numbering
The drive numbers identified by the RAID controller card vary depending on the
cabling of the RAID controller card. This section uses the drive numbers identified by
a RAID controller card that adopts the default cabling described in "Internal Cabling"
in the FusionServer 2288H V7 Server Maintenance and Service Guide.
●
Issue 02 (2023-05-25)
Front Drive
● Front drive:
24 x 2.5"
– Slots 0
to 23
support
only
NVMe
drives.
does not support NVMe drives.
representative or see "OS and Parts Compatibility" in the
Checker.
NO TICE
Drive numbering of the 24 x 2.5" drive NVMe configuration 1 (8 x SATA + 16 x
NVMe) and 24 x 2.5" drive NVMe configuration 3 in
Figure 5-44 Drive numbering
Copyright © xFusion Digital Technologies Co., Ltd.
Rear Drive Built-in Drive
● I/O module -
3: 4 x 2.5"
– Slots 44
to 47
support
only
SAS/
SATA
drives.
5 Hardware Description
Drive
Management
Mode
● SAS/SATA
drive: 1 x
PCIe plug-
in RAID
controller
card
The PCIe
plug-in
RAID
controller
card is
installed in
slot 6 by
default.
● NVMe
drive: CPU
pass-
through
Compatibility
Table 5-28
65