xFusion Digital Technologies FusionServer 2288H V7 Manual page 30

FusionServer 2288H V7 Server
Technical White Paper
Port Description
Table 5-4 Ports on the rear panel
Port
Management
network port
Serial port
VGA port
USB port
Issue 02 (2023-05-25)
1 Management network
port
3 VGA port
5 Socket for PSU 1
Type
RJ45
RJ45
DB15
USB 3.0
Copyright © xFusion Digital Technologies Co., Ltd.
2
4
6
Quantity Description
1 iBMC management network
port, which is used to manage
the server.
NOTE
The management network port is
a GE port that supports 100 Mbit/s
and 1000 Mbit/s auto-negotiation.
1 A port used for debugging. By
default, it serves as the OS
serial port. You can also set it
as the iBMC serial port on the
iBMC CLI.
NOTE
The port is a 3-wire serial
communication port, and its
default baud rate is 115,200 bit/s.
1 Used to connect a display
terminal, such as a monitor or
KVM.
2 Used to connect to a USB 3.0
device.
NOTICE
● The maximum current is 1.3 A
● Before connecting an external
● The USB 3.0 port can be used
5 Hardware Description
Serial port
USB 3.0 port
Socket for PSU 2
for an external USB device.
USB device, ensure that the
USB device functions properly;
otherwise, it may adversely
impact the server.
to supply power to low-power
peripherals. However, the USB
3.0 port must comply with the
USB specifications. To run
advanced peripherals, such as
external CD/DVD drives, an
external power supply is
required.
23