xFusion Digital Technologies FusionServer 2288H V7 Manual page 41

FusionServer 2288H V7 Server
Technical White Paper
Configuratio
n
Configuration
1: 8 x 2.5"
drives + 4 x
GPU cards
Configuration
2: 8 x 2.5"
drives + 4 x
GPU cards
● a: NVMe drives are supported when CPU 2 is configured. A single-CPU server
● For details about the optional components, consult the local sales
Drive Numbering
The drive numbers identified by the RAID controller card vary depending on the
cabling of the RAID controller card. This section uses the drive numbers identified by
a RAID controller card that adopts the default cabling described in "Internal Cabling"
in the FusionServer 2288H V7 Server Maintenance and Service Guide.
●
Issue 02 (2023-05-25)
Front Drive
● Front drive:
8 x 2.5"
– Slots 0
to 7
support
only
SATA
drives.
● Front drive:
8 x 2.5"
– Slots 0
to 7
support
only
SAS/
SATA
drives.
does not support NVMe drives.
representative or see "OS and Parts Compatibility" in the
Checker.
NO TICE
Drive numbering of the 8 x 2.5" drive pass-through configuration 1 in
Copyright © xFusion Digital Technologies Co., Ltd.
Rear Drive Built-in Drive
- -
- -
5 Hardware Description
Drive
Management
Mode
● PCH pass-
through
● 1 x PCIe
plug-in
RAID
controller
card
The PCIe
plug-in
RAID
controller
card is
installed in
slot 3 by
default.
Compatibility
Table 5-7
34