xFusion Digital Technologies FusionServer 2288H V7 Manual page 26

FusionServer 2288H V7 Server
Technical White Paper
●
Issue 02 (2023-05-25)
7 (Optional) FlexIO card 1
NOTE
The FlexIO card slots
support only OCP 3.0 NICs.
NO TE
● I/O module 1 and I/O module 2 each can be a PCIe riser module, 2 x 3.5" rear-drive
module, or a module with 2 x 2.5" rear drives and one PCIe riser module.
● I/O module 3 supports a PCIe riser module or 4 x 2.5" rear-drive module.
● For details about the OCP 3.0 NIC, see
● The figure is for reference only. The actual configuration may vary.
4-GPU model
Figure 5-17 Rear view
1 Slot 1
3 Slot 7
5 PSU 2
7 (Optional) FlexIO card 2
NOTE
The FlexIO card slots
support only OCP 3.0 NICs.
9 Slot 3
NO TE
● For details about the OCP 3.0 NIC, see
● The figure is for reference only. The actual configuration may vary.
Copyright © xFusion Digital Technologies Co., Ltd.
5 Hardware Description
- -
5.6.1 OCP 3.0 NIC.
2 Slot 4
4 Slot 9
6 PSU 1
8 Slot 6
10 (Optional) FlexIO card 1
NOTE
The FlexIO card slots
support only OCP 3.0 NICs.
5.6.1 OCP 3.0 NIC.
19