xFusion Digital Technologies FusionServer 2288H V7 Manual page 61

FusionServer 2288H V7 Server
Technical White Paper
Configuratio
n
12 x 3.5" drive
EXP
configuration
2
● a: I/O module 1 (2 x 2.5") is configured with rear 2 x 2.5" drives and a PCIe riser
● b: NVMe drives are supported when CPU 2 is configured. A single-CPU server
● For details about the optional components, consult the local sales
Drive numbering
The drive numbers identified by the RAID controller card vary depending on the
cabling of the RAID controller card. This section uses the drive numbers identified by
a RAID controller card that adopts the default cabling described in "Internal Cabling"
in the FusionServer 2288H V7 Server Maintenance and Service Guide.
Issue 02 (2023-05-25)
Front Drive
● Front drive:
12 x 3.5"
– Slots 0
to 11
support
only
SAS/
SATA
drives.
module.
does not support NVMe drives.
representative or see "OS and Parts Compatibility" in the
Checker.
NO TICE
Copyright © xFusion Digital Technologies Co., Ltd.
Rear Drive Built-in Drive
● I/O module ● Built-in
a drive: 4 x
1: 2 x 2.5"
3.5"
– Slots 40
– Slots 36
to 41
support
only
SAS/
SATA
drives.
● I/O module
2: 2 x 3.5"
– Slots 42
to 43
support
only
SAS/
SATA
drives.
● I/O module
3: 4 x 2.5"
– Slots 44
to 47
support
SAS/
SATA/
NVMe
b
drives .
5 Hardware Description
Drive
Management
Mode
● SAS/SATA
drive: 1 x
PCIe plug-
in RAID
controller
to 39
card
support
The PCIe
only
plug-in
SAS/
RAID
SATA
controller
drives.
card is
installed in
slot 3 by
default.
● NVMe
drive: CPU
pass-
through
Compatibility
54