Table of Contents
Advertisement
Web-based Configuration Guide
5.4.2
Configuring Global MVR Parameters
Choose Local Device > L2 Multicast > MVR.
Click to enable the MVR, select the MVR VLAN, set the multicast group supported by the VLAN, and click Save.
Multiple multicast groups can be specified by entering the start and end multicast IP addresses.
Table 5-3
Description of Configuring Global MVR Parameters
Parameter
MVR
Description
Enables/Disables MVR globally
87
L2 Multicast
Default Value
Disable
Advertisement
Table of Contents
Need help?
Do you have a question about the RG-CS83 Series and is the answer not in the manual?