Ruijie RG-CS83 Series Configuration Manual page 247

Web-based Configuration Guide
4. v 3 user configuration

Introduction

prerequisite
When the SNMP protocol version is set to v3 , the v3 group configuration needs to be completed.
illustrate
Select the SNMP protocol version, click <Save>, and the corresponding configuration options will appear on
the view/group/group/user access control interface.

configuration steps
[Entire Network Management - Page Wizard] Setting >> SNMP >> View/Group/Group/User Access Control >>.
(1) In the " SNMP v3 Client List " area, click <Add> to create a v3 user .
(2) Set v3 user related parameters.
243
System Configuration