Ruijie RG-CS83 Series Configuration Manual page 327

Web-based Configuration Guide
Trap v3 is a network management mechanism based on SNMP protocol, which is used to send alarm
notifications to management personnel. Unlike previous versions, trap v3 provides more secure
and flexible configuration options, including authentication and encryption.
Trap v3 can be customized to choose the conditions and methods to send alerts, as well as who
receives alerts and how to be notified. This enables administrators to understand the status of
network devices more accurately and take timely measures to ensure network security and
reliability.

prerequisite
When v3 is selected as the trap service version , a trap v3 user needs to be created.

configuration steps
[Entire Network Management - Page Wizard] Setting >> SNMP >> trap setting
(1) Click <Add> in the "trap v3 user " list to create a trap v3 user .
(2) Configure parameters related to t rap v3 users.
Table 4-1 trap v3 user information description table
parameter
target host ip
The port number
username
illustrate
trap peer device IP , support IPv4/IPv6 address
trap peer device port [1, 65535]
username of the trap v3 user
at least 8 characters
323
System Configuration